Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

LEAD TETROXIDE - RED LEAD

NFPA

PRODUCT USE

Storage batteries, glass, pottery and enameling, varnish, purification of alcohol, plaster
and ointments, flux for porcelain painting, protective coating for iron and steel, rubber
colouring, oil- colour for ship paints, cement for glass, packing for gas and steam pipe
joints, pencils for writing on glass, manufacture of lead peroxide matches

SYNONYMS

O4-Pb3, Pb3O4, minium, "dilead (II)lead(IV) oxide", "lead orthoplumbate", "lead oxide",
"lead oxide, red", "lead tetraoxide", "plumboplumbic oxide", "trilead tetroxide", "C.I.
77578", "C.I. Pigment Red 105", "Gold Satinobre", "Mineral Orange", "Mineral Red",
"Minium Non-Setting RL-95", "Orange Lead", "Paris Red", "Red Lead Oxide", Sandix, "Saturn
Red", "Bisley Red Lead Oxide"

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Danger of cumulative effects.
May cause harm to the unborn child.
Possible risk of impaired fertility.
Harmful by inhalation and if swallowed.
Very toxic to aquatic organisms, may cause long- term adverse effects in the
aquatic environment.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be fatal or may produce serious damage to the health of the individual.  

EYE

  Although the material is not thought to be an irritant, direct contact with the eye may cause transient discomfort characterized by tearing or conjunctival redness (as with windburn). Slight abrasive damage may also result. The material may produce foreign body irritation in certain individuals.  

SKIN

  The material is not thought to be a skin irritant (as classified using animal models). Abrasive damage however, may result from prolonged exposures. Good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.  Skin contact with the material may damage the health of the individual; systemic effects may result following absorption.  Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects. Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.  

INHALED

  Inhalation of dusts, generated by the material, during the course of normalhandling, may be harmful.  The material is not thought to produce respiratory irritation (as classified using animal models). Nevertheless inhalation of dusts, or fume, especially for prolonged periods, may produce respiratory discomfort and occasionally, distress.  

CHRONIC HEALTH EFFECTS

  Repeated or long-term occupational exposure is likely to produce cumulative health effects involving organs or biochemical systems.  Ample evidence exists that developmental disorders are directlycaused by human exposure to the material.  Ample evidence from experiments exists that there is a suspicionthis material directly reduces fertility.  Long term exposure to high dust concentrations may cause changes in lung function i.e. pneumoconiosis; caused by particles less than 0.5 micron penetrating and remaining in the lung. Prime symptom is breathlessness; lung shadows show on X-ray.  Lead can cross the placenta, and cause miscarriage, stillbirths and birth defects. Exposure before birth can cause mental retardation, behavioral disorders and infant death. Lead can also cause reduced sex drive, impotence, sterility and damage the sperm of males, increasing the potential for birth defects. Periods in women can also be affected.  Lead can accumulate in the skeleton for a very long time.