Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

LEAD STEARATE

NFPA

PRODUCT USE

High pressure solid and internal lubricants; lubricant in extrusion of plastics;
stabiliser for vinyl polymers, corrosion inhibitor for petroleum.

SYNONYMS

C18-H36-O2.xPb, Pb(C18H35O2)2, "stearic acid lead salt", bleistearat, hal-lub-n

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Danger of cumulative effects.
May cause harm to the unborn child.
Possible risk of impaired fertility.
Harmful by inhalation and if swallowed.
Very toxic to aquatic organisms, may cause long- term adverse effects in the
aquatic environment.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Accidental ingestion of the material may be harmful; animal experiments indicate that ingestion of less than 150 gram may be fatal or may produce serious damage to the health of the individual.  Ingestion of anionic surfactants may produce diarrhea, bloated stomach,and occasional vomiting.  

EYE

  There is some evidence to suggest that this material can causeeye irritation and damage in some persons.  Direct eye contact with some anionic surfactants in high concentration can cause severe damage to the cornea. Low concentrations can cause discomfort, excess blood flow, and corneal clouding and swelling. Recovery may take several days.  

SKIN

  Skin contact with the material may damage the health of the individual; systemic effects may result following absorption.  There is some evidence to suggest that this material can cause inflammation of the skin on contact in some persons.  Open cuts, abraded or irritated skin should not be exposed to this material.  Solution of material in moisture on the skin, or perspiration, mayincrease irritant effects.  Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects. Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.  Anionic surfactants can cause skin redness and pain, as well as a rash. Cracking, scaling and blistering can occur.  

INHALED

  Inhalation of dusts, generated by the material, during the course of normalhandling, may be harmful.  The material is not thought to produce respiratory irritation (as classified using animal models). Nevertheless inhalation of dusts, or fume, especially for prolonged periods, may produce respiratory discomfort and occasionally, distress.  

CHRONIC HEALTH EFFECTS

  Repeated or long-term occupational exposure is likely to produce cumulative health effects involving organs or biochemical systems.  Ample evidence exists that developmental disorders are directlycaused by human exposure to the material.  Ample evidence from experiments exists that there is a suspicionthis material directly reduces fertility.  Long term exposure to high dust concentrations may cause changes in lung function i.e. pneumoconiosis; caused by particles less than 0.5 micron penetrating and remaining in the lung. Prime symptom is breathlessness; lung shadows show on X-ray.  Lead can cross the placenta, and cause miscarriage, stillbirths and birth defects. Exposure before birth can cause mental retardation, behavioral disorders and infant death. Lead can also cause reduced sex drive, impotence, sterility and damage the sperm of males, increasing the potential for birth defects. Periods in women can also be affected.  Lead can accumulate in the skeleton for a very long time.