UNION CARBIDE UCON LUBRICANT 50-HB-5100
Flammability | 1 | |
Toxicity | 3 | |
Body Contact | 2 | |
Reactivity | 0 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Speciality lubricant.
"polyoxyalkylene glycol ether"
Toxic by inhalation.
May cause long- term adverse effects in the aquatic environment.
Considered an unlikely route of entry in commercial/industrial environments. Ingestion may result in nausea, pain, vomiting. Vomit entering the lungs by aspiration may cause potentially lethal chemical pneumonitis. Nonionic surfactants may produce localized irritation of the oral or gastrointestinal lining and induce vomiting and mild diarrhea.
There is some evidence to suggest that this material can causeeye irritation and damage in some persons. The liquid may produce eye discomfort causing smarting, pain and redness. Non-ionic surfactants can cause numbing of the cornea, which masks discomfort normally caused by other agents and leads to corneal injury. Irritation varies depending on the duration of contact, the nature and concentration of the surfactant.
The material may accentuate any pre-existing dermatitis condition. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.
Not normally a hazard due to non-volatile nature of product. Inhalation hazard is increased at higher temperatures. Repeated inhalation of respirable aerosols may produce lung damage which may impair lung function thus affecting the ability of the body to obtain a sufficient oxygen supply.
Principal routes of exposure are usually by skin contact with the material and inhalation of vapor from heated material. Some glycol esters and their ethers cause wasting of the testicles, reproductive changes, infertility and changes to kidney function. Shorter chain compounds are more dangerous. Higher concentrations and prolonged exposure can cause blood in the urine. This material contains a substantial amount of polymer considered to be of low concern. These are classified under having MWs of between 1000 to 10000 with less than 25% of molecules with MWS under 1000 and less than 10% under 500; or having a molecular weight average of over 10000. Functional groups contained on the polymer are then classified into risk categories. Being classified as a polymer of "low concern" does not mean that there are no hazards associated with the chemical. Repeated exposure may cause kidney and liver changes. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.