KENT TRAFFICAIR TURBOCLEAN 2
Flammability | 0 | |
Toxicity | 1 | |
Body Contact | 3 | |
Reactivity | 0 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Water base foaming detergent cleaner for aircraft turbine engines. · Material is mixed
and used in accordance with manufacturers directions. Usually applied by hand spray. Also
used for component cleaning by tank immersion in material.
"detergent spray washer aircraft turbine compressor cleaner Turbo Clean"
Risk of serious damage to eyes.
Harmful to aquatic organisms, may cause long- term adverse effects in the
aquatic environment.
Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre- existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. Considered an unlikely route of entry in commercial/industrial environments. Ingestion may result in nausea, abdominal irritation, pain and diarrhea.
If applied to the eyes, this material causes severe eye damage. The liquid may produce eye discomfort and is capable of causing temporary impairment of vision and/or transient eye inflammation, ulceration.
The material is not thought to produce adverse health effects or skin irritation following contact (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting. Irritation and skin reactions are possible with sensitive skin. The material may accentuate any pre-existing dermatitis condition.
The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting. Not normally a hazard due to non-volatile nature of product. Inhalation hazard is increased at higher temperatures.
Principal routes of exposure are usually by skin contact with the material and inhalation of vapor/spray mist. Prolonged or repeated skin contact may cause drying with cracking,irritation and possible dermatitis following. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.