Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

JMM DIN ARGOFLO

NFPA

PRODUCT USE

Used as a silver brazing alloy.

SYNONYMS

"Din Argoflo", Argoflo, "silver brazing alloy", "brazing alloy", alloy

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Harmful in contact with skin.
Very toxic by inhalation.
May cause CANCER.
Possible risk of impaired fertility.
Possible risk of harm to the unborn child.
Possible risk of irreversible effects.
Toxic: danger of serious damage to health by prolonged exposure through
inhalation and if swallowed.
Toxic to aquatic organisms, may cause long- term adverse effects in the aquatic
environment.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre-  existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern.  

EYE

  Although the material is not thought to be an irritant, direct contact with the eye may produce transient discomfort characterized by tearing or conjunctival redness (as with windburn).  

SKIN

  Skin contact with the material may be harmful; systemic effects may resultfollowing absorption.  The material is not thought to be a skin irritant (as classified using animal models). Temporary discomfort, however, may result from prolonged dermal exposures. Good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.  

INHALED

  There is some evidence to suggest that this material, if inhaled, can irritate the throat and lungs of some persons.  

CHRONIC HEALTH EFFECTS

  There is ample evidence that this material can be regarded as being able to cause cancer in humans based on experiments and other information.  

  Primary routes of exposure are by skin contact/absorption and  inhalation of metal fumes on overheating. Excessive fumes of copper and zinc  oxide can cause metal fume fever with symptoms similar to those of influenza,  often appearing after a latent period of up to 10 hours. The symptoms will  normally disappear after 24 hours with rest. Even short exposures to cadmium  oxide fume can lead to pulmonary oedema and may be fatal.  WARNING: Available studies indicate that occupational exposure to cadmium in  some form (possibly the oxide), increases the risk of prostrate cancer in  man. In addition, one of these studies suggests an increased risk of  respiratory tract cancer.            [ILO Encyclopaedia]  Excessive inhalation of fumes or dust can produce inflammation of  respiratory tract and lung tissue, causing bronchitis, pneumonitis, etc.  Chronic exposure can produce kidney damage and emphysema. [Source: CCINFO]  Removal of contact lenses after an eye injury should only be undertaken by  skilled personnel.