KODAK COLOR DEVELOPER REPLENISHER PROCESS E6 PART A
Flammability | 0 | |
Toxicity | 0 | |
Body Contact | 3 | |
Reactivity | 0 | |
Chronic | 0 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Part A of a two part colour film photographic processing solution. · Material is mixed
and used in accordance with manufacturers directions.
"colour film photographic processing solution", CIN-10099148, PCD-6108
Causes burns.
Risk of serious damage to eyes.
The material can produce chemical burns within the oral cavity and gastrointestinal tract following ingestion. Considered an unlikely route of entry in commercial/industrial environments.
The material can produce chemical burns to the eye following direct contact. Vapors or mists may be extremely irritating. If applied to the eyes, this material causes severe eye damage. The material may be irritating to the eye, with prolonged contact causing inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material can produce chemical burns following direct contactwith the skin. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.
If inhaled, this material can irritate the throat andlungs of some persons. Not normally a hazard due to non-volatile nature of product. Inhalation hazard is increased at higher temperatures. The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function.
Principal routes of exposure are usually by skin contact/eye contact and inhalation of vapor/spray mist. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.