KODAK LIQUID DEVELOPER, PROCESS C22 PART B
Flammability | 0 | |
Toxicity | 1 | |
Body Contact | 4 | |
Reactivity | 0 | |
Chronic | 3 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Part B of a two part professional aerial film photographic processing solution. ·
Material is mixed and used in accordance with manufacturers directions.
"professional aerial film photographic processing solution", 442-6045, KAN-448501, PCD-
5480
Causes severe burns.
Risk of serious damage to eyes.
May impair fertility.
May cause harm to the unborn child.
The material can produce severe chemical burns within the oral cavity and gastrointestinal tract following ingestion. Considered an unlikely route of entry in commercial/industrial environments.
The material can produce severe chemical burns to the eye following direct contact. Vapors or mists may be extremely irritating. If applied to the eyes, this material causes severe eye damage. The material may produce moderate eye irritation leading to inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.
The material can produce severe chemical burns following direct contactwith the skin. Sensitization may result in allergic dermatitis responses includingrash, itching, hives or swelling of extremities. The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.
If inhaled, this material can irritate the throat andlungs of some persons. Not normally a hazard due to non-volatile nature of product. The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function.
There is some evidence that inhaling this product is more likely to cause a sensitization reaction in some persons compared to the general population. Ample evidence exists from experimentation that reduced human fertility is directly caused by exposure to the material. Ample evidence exists, from results in experimentation, that developmental disorders are directly caused by human exposure to the material.
Principal routes of exposure are usually by skin contact/eye contact. Sensitization may give severe responses to very low levels of exposure, i.e. hypersensitivity. Sensitized persons should not be allowed to work in situations where exposure may occur. As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.