JOTUN JOTACOTE 493 RAPID CURE COMPONENT A*****OBSOLETE****
Flammability | 3 | |
Toxicity | 2 | |
Body Contact | 3 | |
Reactivity | 1 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Resin component (Part A) of a rapid curing, protective epoxy coating Component A or Base
of a 2 pack epoxy coating system. Requires that the two parts be mixed by hand or mixer
before use, in accordance with manufacturers directions. Mix only as much as is required.
Do not return the mixed material to the original containers. The use of a quantity of
material in an unventilated or confined space may result in increased exposure and an
irritating atmosphere developing.Before starting consider control of exposure by
mechanical ventilation.
"Two pack epoxy solvent borne coating paint", "Component A"
Harmful by inhalation.
Irritating to skin.
Risk of serious damage to eyes.
Possible risk of harm to the unborn child.
Highly flammable.
Vapors may cause dizziness or suffocation.
Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre- existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. Considered an unlikely route of entry in commercial/industrial environments. Ingestion may result in nausea, pain, vomiting. Vomit entering the lungs by aspiration may cause potentially lethal chemical pneumonitis.
If applied to the eyes, this material causes severe eye damage.
This material can cause inflammation of the skin oncontact in some persons. Skin contact is not thought to have harmful health effects, however the material may still produce health damage following entry through wounds, lesions or abrasions. Epoxy materials may cause allergic and/or contact dermatitis responses, which may occur on exposure or may become apparent only after repeated exposures. Sensitization is possible. Photoallergic dermatitis may result from contact with the material. This type of response can be elicited only in individuals who have been previously allergically sensitized to the chemical agent and appropriate radiation. Photoallergic dermatitis presents, clinically, as an eczematous dermatitis in sun-exposed areas. Sensitization may result in allergic dermatitis responses includingrash, itching, hives or swelling of extremities. Sensitization reactions may appear suddenly after repeatedsymptom free exposures. The material may accentuate any pre-existing skin condition. Open cuts, abraded or irritated skin should not be exposed to this material.
The material is not thought to produce respiratory irritation (as classified using animal models). Nevertheless inhalation of the material, especially for prolonged periods, may produce respiratory discomfort and occasionally, distress. Inhalation hazard is increased at higher temperatures. Inhalation of vapor may result in nausea, headache. Inhalation of vapor may aggravate a pre-existing respiratory condition such as asthma, bronchitis, emphysema.
There is some evidence that inhaling this product is more likely to cause a sensitization reaction in some persons compared to the general population.
Principal routes of exposure are usually by skin contact with the material, inhalation of vapor, inhalation of vapor from the curing material. Prolonged or repeated skin contact may cause drying with cracking,irritation and possible dermatitis following. Respiratory sensitization may result in allergic/asthma like responses; from coughing and minor breathing difficulties to bronchitis with wheezing, gasping. Sensitization may give severe responses to very low levels of exposure, i.e. hypersensitivity. Sensitized persons should not be allowed to work in situations where exposure may occur.