Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

UNIMIN RESIN COATED CHROMITE *** OBSOLETE ***

NFPA

PRODUCT USE

Used in the foundry industry.

SYNONYMS

"phenolic resin phenol formaldehyde resin coated chromite", "two-stage phenolic resin
coated foundry sand"

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Harmful to aquatic organisms.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre-  existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern.  Considered an unlikely route of entry in commercial/industrial environments.  

EYE

  Although the material is not thought to be an irritant, direct contact with the eye may produce transient discomfort characterized by tearing or conjunctival redness (as with windburn).  

SKIN

  The material is not thought to produce adverse health effects or skin irritation following contact (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.  Irritation and skin reactions are possible with sensitive skin.  Open cuts, abraded or irritated skin should not be exposed to this material.  

INHALED

  The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting.  Inhalation hazard is increased at higher temperatures.  

CHRONIC HEALTH EFFECTS

  Principal routes of exposure are usually by.  inhalation of generated dust and inhalation of vapor from heated material.  Increase of respiratory disorders arising from foundry processes using  phenol formaldehyde resins has been reported. [NIOSHTIC]  Fumes from foundry processes may irritate eyes and mucous membranes and may  be harmful if inhaled in concentrated form.