ZENECA DEMON WP
Flammability | 1 | |
Toxicity | 4 | |
Body Contact | 3 | |
Reactivity | 1 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Pyrethroid insecticide.
insecticide
Harmful in contact with skin.
Danger of cumulative effects.
Risk of serious damage to eyes.
May cause SENSITIZATION by skin contact.
Harmful: danger of serious damage to health by prolonged exposure if swallowed.
Very toxic by inhalation and if swallowed.
Irritating to respiratory system and skin.
Very toxic to aquatic organisms, may cause long- term adverse effects in the
aquatic environment.
Severely toxic effects may result from the accidental ingestion of the material; animal experiments indicate that ingestion of less than 5 gram may be fatal or may produce serious damage to the health of the individual. Toxic effects may result from the accidental ingestion of the material; animal experiments indicate that ingestion of less than 40 gram may be fatal or may produce serious damage to the health of the individual.
If applied to the eyes, this material causes severe eye damage. Although the material is not thought to be an irritant, direct contact with the eye may cause transient discomfort characterized by tearing or conjunctival redness (as with windburn). Slight abrasive damage may also result. The material may produce foreign body irritation in certain individuals.
Skin contact with the material may be harmful; systemic effects may resultfollowing absorption. This material can cause inflammation of the skin oncontact in some persons. There is some evidence to suggest that this material, on a single contact with skin, can cause irreversible damage of organs. Toxic effects may result from skin absorption. Alpha-substituted synthetic pyrethroids can cause "pins and needles" of the skin with a stinging or burning sensation sometimes progressing to tingling and numbness. Tears, sensitivity to light and swelling of the eyes can occur on direct contact. Entry into the blood-stream, through, for example, cuts, abrasions or lesions, may produce systemic injury with harmful effects. Examine the skin prior to the use of the material and ensure that any external damage is suitably protected.
If inhaled, this material can irritate the throat andlungs of some persons. Inhalation of dusts, generated by the material, during the course of normal handling, may produce severely toxic effects; these may be fatal. This material, like natural pyrethrins, may cause central stimulation with nausea, vomiting, stomach upset, diarrhea, hypersensitivity, inco-ordination, tremors, muscle paralysis, convulsion, coma and respiratory failure. Type II compounds cause a "Type II syndrome" characterized by irregular jerky movements, increased saliva production without tears, upper abdominal pain, nausea and vomiting, headache, dizziness, loss of appetite, tiredness, chest tightness, blurred vision, "pins and needles", palpitations, coarse muscle jerks in limbs and altered consciousness. Convulsions can occur in severe cases with flexed arms, extended legs (spastic posture) and unconsciousness. Recovery may take weeks.
Long term exposure to high dust concentrations may cause changes in lung function i.e. pneumoconiosis; caused by particles less than 0.5 micron penetrating and remaining in the lung. Prime symptom is breathlessness; lung shadows show on X-ray. Repeated or long-term occupational exposure is likely to produce cumulative health effects involving organs or biochemical systems. There has been some concern that this material can cause cancer or mutations but there is not enough data to make an assessment. There is some evidence that inhaling this product is more likely to cause a sensitization reaction in some persons compared to the general population. There is limited evidence that, skin contact with this product is more likely to cause a sensitization reaction in some persons compared to the general population.