VESUVIUS CARBRIN MORTAR RANGE CARBON COMPONENT
Flammability | 1 | |
Toxicity | 2 | |
Body Contact | 1 | |
Reactivity | 1 | |
Chronic | 2 | |
SCALE: Min/Nil=0 Low=1 Moderate=2 High=3 Extreme=4 |
Filler/hardener component of two pack mortar for carbon blocks in aluminium and ferrous
industries. Mortar sets in 4- 5 days at 15- 20 deg.C. Refer also to protective measures
for the other component used with the product. Read both MSDS before using; store and
attach MSDS together.
"bonding glue carbon / toluene-4-sulfonyl chloride mixture", "bonding glue carbon /
toluene-4-sulfonyl chloride mixture"
May cause fire.
Although ingestion is not thought to produce harmful effects, the material may still be damaging to the health of the individual following ingestion, especially where pre- existing organ (e.g. liver, kidney) damage is evident. Present definitions of harmful or toxic substances are generally based on doses producing mortality (death) rather than those producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may produce nausea and vomiting. In an occupational setting however, ingestion of insignificant quantities is not thought to be cause for concern. Considered an unlikely route of entry in commercial/industrial environments. Ingestion may result in nausea, abdominal irritation, pain and vomiting.
There is some evidence to suggest that this material can causeeye irritation and damage in some persons.
The material is not thought to produce adverse health effects or skin irritation following contact (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable gloves be used in an occupational setting.
The material is not thought to produce adverse health effects or irritation of the respiratory tract (as classified using animal models). Nevertheless, good hygiene practice requires that exposure be kept to a minimum and that suitable control measures be used in an occupational setting. Effects on lungs are significantly enhanced in the presence of respirableparticles. Persons with impaired respiratory function, airway diseases and conditions such as emphysema or chronic bronchitis, may incur further disability if excessive concentrations of particulate are inhaled.
Principal routes of exposure are usually by inhalation of generated dust and skin contact with the material. Long term exposure to high dust concentrations may cause changes in lung function i.e. pneumoconiosis; caused by particles less than 0.5 micron penetrating and remaining in the lung. Prime symptom is breathlessness; lung shadows show on X-ray. There is insufficient evidence to suggest that exposure to carbon black causes increased susceptibility to cancer or other ill effects. Some lung changes can occur after a prolonged period of exposure as well as increased strain on the right side of the heart.