Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME

USF FILTRATION H55 TREATMENT

NFPA

PRODUCT USE

Used for pH adjustment in water treatment.

SYNONYMS

"pH adjustment", H-55

Section 2 - HAZARDS IDENTIFICATION

CANADIAN WHMIS SYMBOLS

EMERGENCY OVERVIEW

RISK

Causes severe burns.
Risk of serious damage to eyes.

POTENTIAL HEALTH EFFECTS

ACUTE HEALTH EFFECTS

SWALLOWED

  The material can produce severe chemical burns within the oral cavity and gastrointestinal tract following ingestion.  Considered an unlikely route of entry in commercial/industrial environments.  Ingestion may result in nausea, abdominal irritation, pain and vomiting.  

EYE

  The material can produce severe chemical burns to the eye following direct contact. Vapors or mists may be extremely irritating.  If applied to the eyes, this material causes severe eye damage.  The material may produce moderate eye irritation leading to inflammation. Repeated or prolonged exposure to irritants may produce conjunctivitis.  

SKIN

  The material can produce severe chemical burns following direct contactwith the skin.  Reaction to contact with broken skin is prompt and intense. Reaction to contact with intact skin apart from initial soapy feeling may be delayed, but unless removed quickly will result in pain and burns, which may proceed to deep ulceration with scarring.  Bare unprotected skin should not be exposed to this material.  The material may cause skin irritation after prolonged or repeated exposure and may produce on contact skin redness, swelling, the production of vesicles, scaling and thickening of the skin.  

INHALED

  If inhaled, this material can irritate the throat andlungs of some persons.  Not normally a hazard due to non-volatile nature of product.  The material may produce respiratory tract irritation, and result in damage to the lung including reduced lung function.  

CHRONIC HEALTH EFFECTS

  The material is considered to be harmful by all exposure routes.  Principal routes of exposure are usually by skin contact/eye contact with the material and accidental ingestion.  A prompt response to all contact is imperative to minimise damage.  As with any chemical product, contact with unprotected bare skin; inhalation of vapor, mist or dust in work place atmosphere; or ingestion in any form, should be avoided by observing good occupational work practice.